Contact Us

888-315-0175

We Offer Expert Mobile Calibration Services

[VIDEO] How to Calibrate RAD Torque Transducers

Today we’re going to continue our video blog post series with a guide to calibrating RAD torque transducers. These transducers have become an important asset in calibration laboratories worldwide because of their high accuracy and repeatability.

Maxpro carries a range of products from RAD, including RAD Transducers.

Here are some product details from the RAD website: 

  • Ranges up to 7,000 ft.lbs with a calibration certificate from an ISO 17025 accredited lab.
  • Screen on transducer allows for convenient reading
  • Quick connect to RAD Calibration Software
  • Up to 1,500 ft.lbs classified to BS 7882:2008 as Class 1 or better for the primary range (+/-0.5% of reading from 20% to 100% of full scale)
  • From 1,400 ft.lbs to 7,000 ft.lbs classified to BS 7882:2008 as Class 0.5 or better for the primary range (+/-0.25 % of reading from 20% to 100% of full scale)
  • Backward compatible and will suit previous generation RAD
    calibration benches.

 In this clip, Mike Blahut, our calibration and service manager, discusses the capabilities of our calibration lab and our trained and certified technicians.

Maxpro’s calibration lab is certified as well, with an accreditation from A2LA, the nation’s foremost ISO/IEC 17025 accreditation agency.

Watch the clip below to learn more about the torque transducer, and don’t hesitate to contact Maxpro for all your calibration needs.

Subscribe to Blog

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

Categories

Latest Blog Posts